• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. They don't rot or rust like timber and aluminum.

It is essential to clean and oil UPVC windows and doors regularly. This will reduce unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, making it very dangerous and potentially fatal. It is essential to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. If windows with double panes are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this case, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you plan to attempt to remove the window panes yourself it is crucial to wear the proper safety gear such as gloves that are thick and eye protection. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass, so that any shards fall on the fabric instead of onto the floor where they can be trampled on and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to stop water and drafts from entering the home until a professional comes out and repair the window. It also acts as an obstacle to stop intruders from getting into your home. If the distance between the window and the door is significant, you may want to use an alarm system that includes an opening. This will provide the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. However, over time, they can suffer from a variety of issues like sliding. A sagging Upvc Window Repair windows could cause issues with light, draughts and even security. It is crucial to act as soon as you notice your uPVC windows are sliding.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to unblock the windows so you can get at the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close the window and verify the an appropriate fit. If you're satisfied with the size of the window, tighten the screws to hold them in the right position.

If you are unable to reposition the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to lose tightness. It is crucial to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

UPVC handles can also loosen. This is typically caused by screws that have become undone over time, but it could be caused by the handle mechanism getting worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need close the window and then perform an experiment to ensure that it fits. The corner joints of the sash should be aligned with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into its original position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it's crucial to take action. The leaks of water from windows do not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on the severity of the problem the old caulking may require removal before a new layer of caulk can be applied. It is important to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and decrease the efficiency of your energy usage.

It is important to check that any drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Mold spots and rotted sills are also signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the house.

If the leakage is occurring between the double glazed window repairs-glazed glass, it is more likely that the issue is more related to the seal, not the frame. It is also possible to be corrected by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open, or if it blows open with an ease. They can be easily repaired by any skilled DIYer and are usually done within a few minutes.

Like any mechanical part hinges will be damaged over time. The process of replacing a hinge on a window is an easy procedure, but it is simpler if you have someone to assist in holding the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused either due to opening the window in the wrong way or due to a poor installation at the factory. This can often be resolved by sending us a picture through our website and we will be more than happy to give you suggestions.

Regular lubrication of the hinges is essential. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. This should be done at least every year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different things. The hinges can also become unbalanced due to wear, creating gaps where the sash meets frame. These can be easily fixed by giving them a good cleaning, but in the event that they are beyond repair it may be necessary to have them realigned or replaced. The interlock may be misaligned. This happens on the hinge's side, and could require to be cleaned. In some cases it might be necessary to replace them.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and will reduce the possibility of draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. These will help to block out cold air and keep your home warm and cozy!

The windows made of upvc can continue to provide excellent insulation and security to your home by performing regular maintenance and repairs. However, it is important to recognize that all windows have a lifespan and they may reach the point when it's more cost-effective to replace them rather than repair them. If you have any problems with your window made of upvc it is recommended to speak with an expert as soon as possible.